Download - Cisco Network Assistant
If you are looking for a powerful and free graphical management tool for your Cisco devices, you might want to check out Cisco Network Assistant. In this article, we will explain what Cisco Network Assistant is, how to download and install it, how to use it to configure, monitor, and troubleshoot your network, and how to get support and updates for it.
download - cisco network assistant
What is Cisco Network Assistant?
Cisco Network Assistant is a software application that helps you simplify the administration of Cisco networks. It allows you to manage up to 80 devices, including switches, routers, wireless access points, firewalls, and IP phones, from a single user interface. You can use Cisco Network Assistant to perform common tasks such as:
Viewing the network topology and device status
Configuring device settings and security features
Deploying new devices and software images
Generating network reports and alerts
Troubleshooting network issues and errors
Backing up and restoring device configurations
Cisco Network Assistant supports a wide range of Cisco devices, including Catalyst, Nexus, ISR, ASA, Aironet, IP Phone, and TelePresence products. You can find the complete list of supported devices .
Features and benefits of Cisco Network Assistant
Cisco Network Assistant offers many features and benefits that make it a valuable tool for network administrators. Some of them are:
How to download cisco network assistant for free
Cisco network assistant download windows 10
Cisco network assistant latest version download
Cisco network assistant retirement notification
Cisco configuration assistant vs network assistant
Cisco network assistant alternative
Cisco network assistant supported devices
Cisco network assistant tutorial
Cisco network assistant backup configuration
Cisco network assistant password recovery
Cisco network assistant vlan configuration
Cisco network assistant smartports
Cisco network assistant mac address table
Cisco network assistant snmp configuration
Cisco network assistant ssh configuration
Cisco network assistant firmware upgrade
Cisco network assistant cluster management
Cisco network assistant port security
Cisco network assistant switch stacking
Cisco network assistant ip routing
Cisco network assistant dhcp configuration
Cisco network assistant port mirroring
Cisco network assistant qos configuration
Cisco network assistant trunk configuration
Cisco network assistant command line interface
Cisco network assistant multiple views
Cisco network assistant troubleshooting tools
Cisco network assistant discovery settings
Cisco network assistant end of life
Cisco network assistant end of support
Cisco network assistant system requirements
Cisco network assistant installation guide
Cisco network assistant user guide
Cisco network assistant release notes
Cisco network assistant data sheet
Cisco network assistant license agreement
Cisco network assistant review
Cisco network assistant benefits
Cisco network assistant features
Cisco network assistant limitations
Cisco network assistant best practices
Cisco network assistant tips and tricks
Cisco network assistant online training
Cisco network assistant certification exam
Cisco network assistant forum
Cisco network assistant community support
Cisco network assistant customer service number
Cisco network assistant feedback and suggestions
Download cisco configuration professional express instead of cisco network assistant
It is free to download and use. You do not need any license or subscription to use Cisco Network Assistant.
It is easy to install and use. You do not need any special training or skills to use Cisco Network Assistant. It has a simple graphical user interface that guides you through the network management tasks.
It is secure and reliable. You can use Cisco Network Assistant to configure security features such as passwords, access lists, encryption, and authentication on your devices. It also uses Secure Sockets Layer (SSL) or Secure Shell (SSH) protocols to communicate with the devices.
It is scalable and flexible. You can use Cisco Network Assistant to manage up to 80 devices in a single cluster or multiple clusters across different locations. You can also customize the network views and reports according to your preferences.
It is compatible and interoperable. You can use Cisco Network Assistant to manage devices running different software versions and platforms. It also supports various network protocols such as SNMP, CDP, RMON, Telnet, HTTP, HTTPS, TFTP, FTP, SCP, SFTP, NTP, DNS, DHCP, Ping, Traceroute, etc.
How to download and install Cisco Network Assistant
To download and install Cisco Network Assistant, you need to follow these steps:
Go to the page on the Cisco website.
Click on the Download Software link under the Resources section.
Select the latest version of Cisco Network Assistant from the list of available downloads.
Click on the Download button and save the file on your computer.
Run the file and follow the installation wizard instructions.
Launch Cisco Network Assistant from the Start menu or the desktop shortcut.
How to use Cisco Network Assistant
Once you have installed Cisco Network Assistant, you can use it to configure, deploy, and manage your Cisco devices. Here are some of the main functions that you can perform with Cisco Network Assistant:
How to configure, deploy, and manage Cisco devices with Cisco Network Assistant
Cisco Network Assistant provides various tools and wizards that help you configure, deploy, and manage your Cisco devices. Some of them are:
Setup wizards
You can use the setup wizards to perform initial configuration tasks such as setting up device names, passwords, IP addresses, VLANs, routing protocols, security features, etc. You can also use the setup wizards to create and apply configuration templates to multiple devices at once.
Multiple network views
You can use the multiple network views to see the network topology and device status in different ways. You can choose from the following views:
Front panel view: shows the physical appearance and port status of each device.
Topology view: shows the logical connections and links between the devices.
VLAN view: shows the VLAN membership and configuration of each device.
IP routing view: shows the IP routing information and configuration of each device.
Security view: shows the security features and configuration of each device.
Wireless view: shows the wireless settings and configuration of each device.
Cluster view: shows the cluster membership and configuration of each device.
Simplified network reporting
You can use the simplified network reporting feature to generate various reports and alerts on your network performance and health. You can choose from the following reports:
Network summary report: shows the overall network status and statistics.
Device inventory report: shows the device information such as model, serial number, software version, etc.
Device configuration report: shows the device configuration details such as passwords, IP addresses, VLANs, etc.
Device performance report: shows the device performance metrics such as CPU utilization, memory usage, interface statistics, etc.
Device error report: shows the device error messages and logs.
Network alert report: shows the network alerts and notifications such as link failures, security violations, etc.
Drag and drop software updates
You can use the drag and drop software updates feature to upgrade or downgrade the software images on your devices. You can simply drag and drop the software image files from your computer to the devices in Cisco Network Assistant. You can also schedule the software updates to run at a specific time or date.
Troubleshooting
You can use the troubleshooting tools to diagnose and resolve network issues and errors. You can use the following tools:
Ping: tests the connectivity between two devices or hosts by sending and receiving packets.
Traceroute: traces the path of packets from one device or host to another by showing the hops and delays along the way.
Telnet/SSH: establishes a remote terminal session with a device or host by using Telnet or SSH protocols.
SNMP: monitors and manages network devices by using Simple Network Management Protocol (SNMP).
RMON: collects and analyzes network statistics by using Remote Monitoring (RMON).
CDP: discovers neighboring devices by using Cisco Discovery Protocol (CDP).
How to backup and restore configurations with Cisco Network Assistant
You can use Cisco Network Assistant to backup and restore configurations on your devices. You can backup or restore configurations from or to a local or remote file server by using TFTP, FTP, SCP, or SFTP protocols. You can also backup or restore configurations from or to another device by using Telnet or SSH protocols. You can also schedule the backup or restore operations to run at a specific time or date.
How to get support and updates for Cisco Network Assistant
Cisco Network Assistant is a free software application that does not require any license or subscription. However, you can still get support and updates for it from Cisco. Here are some of the ways you can do that:
End-of-life and end-of-sale notices for Cisco Network Assistant
Cisco periodically announces end-of-life and end-of-sale notices for its products, including Cisco Network Assistant. These notices inform you about the last date of support and availability of a product. You can find the end-of-life and end-of-sale notices for Cisco Network Assistant .
Cisco Configuration Assistant as an alternative to Cisco Network Assistant
Cisco Configuration Assistant is another software application that helps you configure and manage Cisco devices. It is similar to Cisco Network Assistant, but it has some additional features and benefits, such as:
It supports more devices and platforms, including Cisco Unified Communications Manager Express, Cisco Unity Express, Cisco Smart Business Communications System, etc.
It provides more advanced configuration options and wizards, such as voice, video, security, wireless, etc.
It integrates with other Cisco tools and services, such as Cisco Smart CallConnector, Cisco Smart Business Architecture, Cisco Smart Care Service, etc.
You can download Cisco Configuration Assistant from the same page as Cisco Network Assistant. However, you need to have a valid Cisco service contract or warranty to use it.
Cisco support community and resources for Cisco Network Assistant users
You can also get support and updates for Cisco Network Assistant from the Cisco support community and resources. Some of them are:
Cisco Network Assistant documentation: provides user guides, release notes, FAQs, troubleshooting tips, etc. for Cisco Network Assistant. You can find the documentation .
Cisco Network Assistant forum: provides a platform for Cisco Network Assistant users to ask questions, share experiences, and learn from each other. You can join the forum .
Cisco Technical Assistance Center (TAC): provides technical support and assistance for Cisco products and services. You can contact the TAC by phone, email, or web. You can find the contact details .
Cisco Software Download Center: provides software updates and patches for Cisco products and services. You can access the download center .
Conclusion
Cisco Network Assistant is a free and powerful graphical management tool for your Cisco devices. It helps you simplify the administration of your network by providing various features and benefits such as setup wizards, multiple network views, simplified network reporting, drag and drop software updates, troubleshooting tools, backup and restore configurations, etc. You can download and install Cisco Network Assistant from the Cisco website and use it to configure, deploy, and manage up to 80 devices in a single cluster or multiple clusters across different locations. You can also get support and updates for Cisco Network Assistant from the end-of-life and end-of-sale notices, the Cisco Configuration Assistant alternative, and the Cisco support community and resources.
FAQs
Here are some of the frequently asked questions about Cisco Network Assistant:
Q: What are the system requirements for Cisco Network Assistant?
A: To run Cisco Network Assistant on your computer, you need to have the following system requirements:
Operating system: Windows 7 or later
Processor: Pentium 4 or higher
Memory: 1 GB RAM or higher
Disk space: 300 MB or higher
Display: 1024 x 768 resolution or higher
Network: TCP/IP protocol enabled
Q: How do I add devices to Cisco Network Assistant?
A: To add devices to Cisco Network Assistant, you need to follow these steps:
Launch Cisco Network Assistant and click on the Add button on the toolbar.
Select the discovery method you want to use to find the devices on your network. You can choose from IP address range, CDP neighbors, device name or IP address list, or manual entry.
Enter the discovery parameters such as IP address range, device name or IP address list, community string, username and password, etc.
Click on the Discover button and wait for the discovery process to complete.
Select the devices you want to add from the discovery results and click on the Add button.
Click on the Finish button to close the discovery wizard.
Q: How do I create a cluster with Cisco Network Assistant?
A: To create a cluster with Cisco Network Assistant, you need to follow these steps:
Select the devices you want to include in the cluster from the network view.
Right-click on one of the selected devices and choose Create Cluster from the menu.
Enter a name for the cluster and click on the OK button.
The cluster will be created and displayed in the network view.
Q: How do I apply a configuration template with Cisco Network Assistant?
A: To apply a configuration template with Cisco Network Assistant, you need to follow these steps:
Select the devices you want to apply the configuration template to from the network view.
Click on the Configure button on the toolbar and choose Configuration Templates from the menu.
Select the configuration template you want to use from the list of available templates. You can also create your own custom templates by clicking on the New button.
Click on the Apply button and wait for the configuration process to complete.
The configuration template will be applied to the selected devices and displayed in the network view.
Q: How do I update the software image on a device with Cisco Network Assistant?
A: To update the software image on a device with Cisco Network Assistant, you need to follow these steps:
Select the device you want to update from the network view.
Click on the Configure button on the toolbar and choose Software Update from the menu.
Select the source of the software image file. You can choose from local file, remote file server, or another device.
Enter the location and name of the software image file. You can also browse for the file by clicking on the Browse button.
Click on the Update button and wait for the update process to complete.
The software image will be updated on the device and displayed in the network view.
44f88ac181
Comments